Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cap & Crown Cost in San Pedro?
Most homeowners here pay $450 – $1,150 to have a chimney crown repaired and a new cap installed. A simple cap replacement alone usually runs $180 – $480, while a full crown rebuild with new cap lands closer to $750 – $1,150. We write a free estimate before any work begins, and that estimate sets the final price.
Those ranges hold across most of San Pedro, from the older bungalows near Point Fermin to the hillside homes above Western Avenue. The number that matters is the one on your written estimate, and getting there takes a look at the crown, the flue, and how the cap is anchored.
Chimney Cap & Crown Cost Breakdown (2026)
Caps and crowns are two different pieces of work, and they’re often priced together because a failing crown usually takes the cap’s mounting with it. Here’s how the line items typically break down in this market:
| Line item | Typical range | What it covers |
|---|---|---|
| Standard single-flue cap (stock size) | $180 – $320 | Gelco or Famco cap, sized to the flue, installed and sealed |
| Multi-flue or custom cap | $320 – $480 | Larger footprint, custom dimensions, or a cap that has to clear a taller flue |
| Crown patching (hairline cracks, minor spalling) | $250 – $450 | Crack repair and sealing where the crown is otherwise sound |
| Crown rebuild (full replacement) | $550 – $950 | Old crown removed, new crown formed and sloped away from the flue |
| Cap plus crown rebuild, combined | $750 – $1,150 | Both items done in one visit, with the crown set before the cap goes on |
| Crown rebuild with flue resurfacing (HeatShield) | $950 – $1,600 | Adds ceramic resurfacing where the top of the flue is cracked or washed out |
| Chimney sweeping, if it’s been a while | $150 – $280 | Often paired with cap and crown work so the flue is checked before it’s capped |
What pushes a job toward the top of these ranges? Access is the big one. A steep-pitch roof or a chimney tucked behind a dormer means more setup, sometimes a ladder and staging beyond the usual. Multi-flue chimneys cost more than single-flue because the cap footprint is larger and the crown is wider. And a crown that’s pulled away from the flue entirely costs more to rebuild than one with a few surface cracks, because the whole top has to come off and be re-formed.
What keeps a job at the low end: a stock-size cap on a standard flue, a crown with minor cracking that can be patched, and easy roof access. When those line up, the work is quick and the price reflects it.
What Affects Chimney Cap & Crown Pricing in San Pedro
Pricing here isn’t just a national average with a local sticker. A few things specific to this market move the number:
- Roof style and pitch. San Pedro has a lot of varied rooflines, from flat-ish bungalow roofs to steeper hillside pitches. A steeper roof means slower access and sometimes extra setup, and that shows up in the estimate.
- Multi-flue chimneys. Older homes here often have chimneys serving more than one flue. A bigger cap and a wider crown mean more material and more time, typically $150 – $250 more than a single-flue job.
- Cap material. A standard stock cap from Gelco or Famco costs less than a custom-sized cap. Custom sizing costs more but fits the flue properly, which prevents the gap that lets water and animals in.
- Condition of the flue top. If the wash at the top of the flue is cracked or spalling, it has to be addressed before a new cap is set. HeatShield ceramic resurfacing can handle that without a full reline, which keeps the cost down compared to relining.
- Whether you pair it with a sweep. Capping a chimney that hasn’t been swept means capping whatever’s inside it. We usually recommend a sweep and inspection before the cap goes on, and bundling both into one visit saves a trip.
- Brand and part availability. We stock Gelco and Famco caps and accessories, so the job doesn’t get paused waiting on materials. When parts come from the same wholesale networks used by credentialed professionals nationwide, including Olympia Chimney and Copperfield, you’re getting spec-grade parts, not whatever’s on the discount shelf.
How to Save on Chimney Cap & Crown
The best way to save on this work is to catch it early. A crown with a hairline crack costs a few hundred dollars to patch. A crown that’s been letting water into the chimney structure for a few seasons can mean repairs to the flue and the brick above the roofline, and that’s a different budget entirely. Here’s what actually helps:
- Get the crown repaired before it fails completely. Patching a sound crown costs $250 – $450. Rebuilding one that’s pulled away from the flue is $550 – $950. Early action is the cheapest path.
- Combine the cap and crown in one visit. Doing both together saves the setup and access cost of a second trip. If the crown needs work, that’s the time to replace a worn cap.
- Ask about HeatShield instead of a full reline. If the top of the flue is cracked but the liner is otherwise sound, ceramic resurfacing can extend the flue’s life at a fraction of the cost of relining. It’s not right for every chimney, but it’s worth asking about.
- Sweep before you cap. It costs less to bundle a sweep with the cap and crown than to pay for a separate visit later. And you’ll know what’s in the flue before you seal it shut.
- Get the estimate in writing. Our estimates are free, and the written number is the price. Call (833) 576-1522. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
One more thing worth knowing: a cap isn’t just a lid. It keeps rain out, keeps birds and squirrels out, and keeps sparks off the roof. A cheap cap that doesn’t fit right or rusts out in a couple of seasons isn’t a savings. The parts we install are the same ones professionals source from the trade’s wholesale networks, and they last.
FAQs – Chimney Cap & Crown Cost
How much does a chimney cap cost in San Pedro?
A standard single-flue cap installed runs $180 – $320. A multi-flue or custom cap is $320 – $480. The price difference comes down to size and footprint, not brand. Call (833) 576-1522 for an exact quote on your chimney.
How much does it cost to rebuild a chimney crown?
A full crown rebuild typically runs $550 – $950 in this market, and $750 – $1,150 when combined with a new cap. A patch on a sound crown is $250 – $450. The written estimate sets the final price, and estimates are free.
Is it cheaper to repair or replace a chimney crown?
Repair is cheaper when the crown is sound but cracked, usually $250 – $450 versus $550 – $950 for a rebuild. If the crown has pulled away from the flue or is spalling badly, repair won’t hold and a rebuild is the right call. We’ll tell you which one you have.
Can you install a chimney cap and fix the crown in one visit?
Yes. We stock Gelco and Famco caps and accessories, so the cap and the crown rebuild usually happen in one visit. That saves you the cost of a second trip. Fast dispatch from 7am to 7pm, Sunday through Friday.
Do I need a chimney sweep before capping?
We recommend it. A sweep and inspection before capping usually costs $150 – $280 and tells you what’s in the flue before it’s sealed. If you haven’t had the chimney looked at in a while, bundling the sweep with the cap and crown work is the practical move.
Capping and crowning are one of those jobs where the right part and the right fit matter more than the price tag. A properly sized cap from Gelco or Famco, set on a crown that sheds water away from the flue, is a small job that protects a big investment. We serve homeowners across San Pedro, and we handle the full system: Chimney Sweep San Pedro covers sweeping, repair, and dryer vent cleaning under one roof, so you’re not calling three contractors for one chimney. If the flue needs more than a cap, we install DuraFlex flexible liner systems and use HeatShield ceramic resurfacing to extend flue life without a full reline when that’s the right path.
Call (833) 576-1522 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We’ve been serving San Pedro since 2016, and we bring the parts with us.
Pricing reflects the San Pedro market as of 2026. Chimney Sweep San Pedro offers free estimates – call (833) 576-1522.
What Our Customers Say
"Fast, fair, done right. No notes."
- Rohan Patel"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
- Jennifer Meyer"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Dustin Padgett